If you don’t remember your iPhone code or iPhone is blocked. How to bypass iPhone passcode?
If you enter the wrong code too many times, the device will display a message that the code has been blocked. If you don’t remember the code, you’ll need to erase your iPhone, which will delete the data and settings, including the code.
If you have created an iPhone backup, you can restore the data and settings after restoring the iPhone. If you never backed up your iPhone before you lost your code, you can’t save the data stored on it. Follow the steps below to remove the code.
Is the workaround legal?
Skipping password codes, in general, applies to what we call the “black hat” Doubtful) technical support pages, but there are common and justified cases where people just forgot their password. In these cases, you need to get around the code to use your own device. Don’t worry about it.
Restore the device using recovery mode
Restoring an iPad or iPhone and restarting is the best and easiest solution if you do not have an access code. It deletes your personal data, but if you have a backup you can restore it, it will be as new as new … but no longer password protected.
Attempting to restore iPad from iTunes Requires a password, but you can restore it from recovery mode without one. It will completely suffer the device and install the latest version of iOS from scratch. Note: An Apple ID and password are required to identify your Apple device.
Follow these steps to restore an iPad or iPhone from recovery mode:
- Charging the device to at least 20 percent.
- Hold the power button until Slide To Power Off appears on the screen. Swipe to turn off.
- Open iTunes on a Mac or PC.
- Press and hold the volume down button (on iPhone 7 and 7 Plus) or the Home button (on all other iOS devices).
- After holding down the button, connect the device to a Mac or PC.
Note that the iPhone 7 and iPhone 7 Plus do not have hardware home buttons – these are haptric software-based buttons that do nothing when the device is turned off – so you must use the volume down button instead of the home button.
Completed the process, the device should turn on in recovery mode. The screen should display a blue iTunes logo and a white zip cable. ITunes should display a message stating that iTunes has detected the iPad in recovery mode. You must restore it before you can use it with iTunes.
Click OK and then restore and update.
Click Restore iPad and remove the software with the program and follow the instructions below:
Restore iPad or iPhone
- Enter the Apple ID and password used to configure the device.
- Click Continue.
- Select Restore from this backup. Restore the device to an earlier time. You can also configure it as a new model by selecting Set as new iPad / iPhone.
- Click Continue.
- Your device will start and start as Before, but without a password. You may be prompted to enter your Apple ID, depending on the version of iOS you are using.
If you set an access code and want to delete it completely, after accessing your iOS device, just go to Settings > Touch ID and password, and then tap the “Enable Passcode” button.